Are You Looking For A Unvented Hot Water Cylinder Installation/Replacement In Bromyard?
Unvented hot water cylinders can produce hot water efficiently and give exceptional performance. If you are looking to install a new unvented hot water system or replace an older one in Bromyard, you are at the right place!
Unvented hot water cylinders are capable of producing multiple flows of hot water at different draw points simultaneously at high flow rates and good pressure. These can be excellent property choices for situations where multiple people are living in the same property who need to be able to use hot water drawing points, such as showers simultaneously.
Many unvented hot water cylinder systems are underperforming due to poor installation, plus they can potentially be very dangerous when installed incorrectly! It is vital that you use a qualified and competent installer to install an uninvented hot water cylinder in order to ensure both performance and safety. You can ensure this by using us!
So Why Use Us?
- We have transparent prices, show up on time and are highly professional
- We are both WaterSafe & Gas Safe registered
- Our engineers are registered heating engineers with the CIPHE
- We are a TrustMark & FairTrades registered company
We offer guarantees of up to 5-years on the equipment we install as part of central heating installations we undertake (terms & conditions apply).
“It is an absolute disgrace the number of unvented hot water cylinders I have witnessed first-hand that present a potential danger to the occupants within the properties I have attended. There are a lot of tradesmen out in the marketplace who should not be working with unvented systems.”
What We Offer:
- We are punctual and provide accurate time-slots
- Excellent value for money
- High-quality workmanship
- Exceptional customer service
For unvented cylinder replacements and new installations, we provide free fully written quotations and arrange arrival times and dates with the customer in advance of the work taking place.
What Is An Unvented Hot Water Cylinder System?
Unvented hot water systems have cylinders that are supplied by mains water and have no header tanks. Cold mains water enters the cylinder at the bottom, is heated by a heat source, such as a boiler, and then is delivered at the mains pressure to the outlets.
When carefully designed, unvented hot water cylinders can provide lots of flow that can be used simultaneously to supply multiple hot water outlets.
Typically, the pressure at which these systems operate at is dictated by the mains pressure, although pumps may be used to increase pressure where low.
Unvented hot water systems are known as the premium method for hot water storage and delivery. It is possible to have more than one heat source to heat the water in the cylinder, which allows for such things as solar panels to be used to reduce fuel costs.
What Happens When You Cut Corners And Use The Wrong Company!
Pressure, flow, pipe sizes, pipe routes and other factors all affect the performance of an unvented hot water cylinder. Unvented hot water cylinders can produce excellent results with careful consideration and design. Potentially, three to four showers could run from a single cylinder simultaneously, which can be further pushed through advanced plumbing system design and the use of cylinders banks. These systems need intelligence, experience and skill to be designed and implemented successfully. Cut corners here, and you may be sadly disappointed with your investment’s performance!
It is extraordinary how many poorly installed cylinders we find in Bromyard and the surrounding areas during our servicing tasks! We regularly report faults found to clients who have bought homes with these systems fitted or had them installed by others. In many instances, this has to lead to the customer chasing rectification from builders and plumbing companies or paying to have the work put right themselves.
Following our findings of faults on unvented systems in neighbouring properties, we have experienced whole blocks of flats and large numbers of homes on new building estates come together to have defects corrected from developers and homebuilders. These systems are often installed wrong, not everybody has the skillset to be able to install them well!
Poorly Installed Unvented Systems Can Kill!
An unvented cylinder that has been installed poorly may pose a significant risk. In the worst case scenario, these cylinders can explode and destroy properties they are contained within due to steam gas explosions! After a catastrophic discharge, poorly installed cylinders may also fail to remove high-temperature steam and water to a safe location. There are numerous situations in this country where people were killed or seriously hurt as a result of the poor installation of this equipment. However, properly installed uninvented hot water cylinders are exceptionally safe and work fantastically.
It is vital that you use the right installer when installing these systems!
Frequently Asked Questions
They can be when installed by the wrong hands, but you do not have to worry about this when using us.
In most cases, yes, but depending on aspects of the property and the work involved. Costs can vary greatly, so other forms of hot water systems may be more cost-effective in some cases. We will always advise you on what is best for you and your situation.
They usually need at least one cupboard space, but more space is needed in some instances. It depends on your performance specifications.
Areas Around Bromyard That We Cover
- Edwyn Ralph
- Tedstone Wafre
- Bishops Frome
- Acton Green
- Saltmarshe Castle