Gas And LPG Pipework Installation

Looking for mains gas or LPG installation or the replacement of faulty pipework in Malvern?

There are many reasons why you may need the installation or replacement of mains gas/LPG pipework in your home. Perhaps it is because of a gas leak leading to a capped meter, pipework which is too small, the need for further gas appliances or even the absence of any existing gas pipework within the building. For whatever reason you require work doing, it is vital that you employ a top-quality engineer who is Gas Safe registered to carry out the perfect job!

So Why Use Us?

  • Registered for both mains gas & LPG with Gas Safe
  • Great value for money
  • Experienced
  • Trustworthy

Minor pipework alterations are charged at the hourly fees as advertised. For significant jobs, we give free quotations with no obligations.

Regardless of dwelling type, if you require gas or LPG pipework for fires, boilers, ovens or heaters, we can provide you with experienced professionals within the Malvern area who can carry out a top-quality job for you! We assure you that we will carry out the work professionally and to a high standard, causing you as little bother within your home as possible.

What We Offer:

  • Top-quality, fully licensed work
  • Fully certified jobs
  • Water-right guarantees
  • Work free from leaks

“Gas pipework can be a minefield for the inexperienced! There are books upon books of legislation, standards, Code of Practice and other aspects which regulate the installation and maintenance of gas pipework and systems. Sure, being Gas Safe registered should mean that the person you are using is up to scratch, but if that was the case, then why is there so much dangerous work being done out in the marketplace?”

Frequently Asked Questions

It is dependent on the amount of work needed. Smaller jobs will be charged in accordance with our advertised hourly prices. However, more significant work will be quoted for. Please do get in touch if you need more information.

Yes – our number is 563390.

We use a mixture of techniques including: testing of pressure, and fluids and equipment, which detect leaks.

At the moment, this is not something we offer.

LPG & Gas Pipeworks Affects

Poor design and flawed installation can impact upon:

How well LPG and gas appliances served by the pipework work
How safe your home, occupants and neighbours are

If gas and LPG pipework is incorrectly sized it may impact the operation of, and in serious cases, the safety of appliances which are connected to the pipework.

Gas and LPG supply systems’ pressure is regulated. All appliances, which run on LPG and mains gas, are designed to operate at certain pressures and need particular flows so they can work properly. Thus, any pipework installations from the meter/cylinder to the appliances within the dwelling need to be effectively designed to avoid restricting the flow or lowering the working pressure. Ineffectively designed pipework does not merely impact negatively on both of these areas which can affect performance, and in worst case scenario, it can make appliances work hazardously.

Other instances of bad practice when installing these systems can cause problems like deterioration of the gas/LPG pipework and gas leaks. Mains gas, and especially LPG, are incredibly dangerous when leaks occur within a home or in other areas where they can gather. There are many examples of explosions, relating to both types of gas, where both destruction of property and death have been the outcomes.

When properly installed, gas and LPG pipework is extremely safe and offers low-cost energy to power a variety of everyday appliances. It is imperative not only to employ a properly qualified, Gas Safe registered engineer for jobs relating to gas, but to also choose on who provides top-quality work and has a wealth of experience.

How LPG And Mains Gas Differ

LPG and mains gas have several key differences, but usually, LPG is used when homes are “off-grid” and therefore unable to access mains gas. It is also common for LPG to be used in mobile homes and static caravans.

Mains gas is far more reasonably priced than LPG. LPG is available in two forms: bottles and bulk vessels. Bulk vessels are the most reasonably-priced type of LPG, but they are still usually 2.5-3 times dearer than gas from the grid per kW. LPG cylinder fuel prices depend on location and the supply company, but these are usually 6-12 times more expensive per kW than mains gas.

LPG is a richer source of energy, and thus for every cubic meter, it will produce more than mains natural gas is able to. Thus, appliances that run on LPG use less significant volumes of fuel than they would if relying on gas.

LPG is more dangerous than mains gas; it needs less in a restricted area to become explosive. Additionally, LPG is more dense than air, so will easily collect at a low level as opposed to mains gas. This quality makes it far more challenging to spot a leak and can lead to the accumulation of hazardous/explosive levels more easily.

Areas Around Malvern That We Cover

  • Leigh Sinton
  • Rhydd
  • Hanley Castle
  • Hanley Swan
  • Colwall
  • Cradley
  • Little Malvern

See all the areas we cover here!