Unvented Hot Water Cylinder Installation

Are You In Need Of Someone To Install A New, Or Replace An Existing Unvented Hot Water Cylinder In The Malvern Area?

Unvented hot water cylinders can produce high flow rates at good pressure to several hot water draw points at the same time. These can be a great choice for homes with several occupants who need to be able to use the hot water, for example showers, concurrently.

Many unvented hot water cylinder systems are not performing to the best of their ability because they have been badly installed; this can also be incredibly dangerous! It is vital that you employ a skilled and experienced installer to carry out the installation of an unvented hot water cylinder to ensure both performance and safety.

Tell Me Why I Should Use You?

  • Experts who are fully qualified and can self certify unvented hot water systems
  • Competitive prices
  • Water Safe approved
  • Experienced, reliable and punctual

The performance of an unvented hot water cylinder can be influenced by the following: pressure, flow, pipe diameters, pipe routes and other factors. With thoughtful planning, unvented hot water cylinders can produce superb results. They have the potential to allow three to four showers to be run concurrently from just one cylinder, which can be pushed even more with the use of advanced plumbing system design and banks of cylinders. The careful design and installation of these systems require thought, experience and proficiency. Attempting to cut corners here may result in being disappointed by the way your investment performs!

The vast number of poorly installed cylinders we have witnessed in Malvern whilst carrying out work is alarming! We are often informing our customers of installation faults we discover, which means builders and plumbing companies are having to revisit the properties to correct their work. We have encountered whole blocks of flats and huge numbers of new build properties uniting to have errors rectified within their homes after we had discovered the mistakes. From landlords who own many dwellings within the same block/area to home owners who had the same builder/developer, we have experienced many properties choose to fight to have installations in their homes corrected.

An unvented cylinder, which is installed dangerously, could cause considerable harm. At worst, the cylinder could explode due to expansion of water to steam, destroying homes along with it! Furthermore, poor installation of unvented hot water cylinders could inadequately remove high-temperature steam/water to a safe place following a horrific discharge. In both scenarios, there are numerous examples across the country where people have been killed or seriously injured as a consequence. Nevertheless, when these cylinders are installed properly, they are incredibly safe and work wonderfully.

It is vital you find someone trustworthy for the installation of new or replacement of existing unvented hot water cylinders in your Malvern property. Whether a new installation, a cylinder replacement or general maintenance, we are able to offer these services with efficiency and effectiveness.

We Offer the following:

  • Completely impartial
  • Our systems are designed to operate to specification
  • Experience workers
  • Reliable and trustworthy

“It is an absolute disgrace the number of unvented hot water cylinders I have witnessed first-hand that present a potential danger to the occupants within the properties I have attended. There are a lot of tradesmen out in the marketplace who should not be working with unvented systems.”

Frequently Asked Questions

If installed incorrectly, they can be, but you would certainly be in safe hands if you chose work from us.

In the majority of cases, yes, but the amount of work required and the prices differ hugely depending on elements of the dwelling. In some cases, other systems may be more economically-sound. We always aim to offer you our expert opinion explaining what is best for both you and your individual circumstances.

They usually need a cupboard space as minimum, but in some cases, more room is needed. It is determined by your specifications for performance.

What Is An Unvented Hot Water Cylinder?

It is a cylinder is a cylinder, fed from the mains, which does not have header tanks to feed it. Mains water goes into the cylinder and is then fed, at mains pressure, to the outlets.

Unvented hot water cylinders, when designed efficiently, can able to produce a high level of flow which can be used for several hot water outlets at the same time.

The pressure at which these cylinders work is usually specific to the mains pressure, although pumps can added in order to improve pressure when it is low.

Areas Around Malvern That We Cover

  • Leigh Sinton
  • Rhydd
  • Hanley Castle
  • Hanley Swan
  • Colwall
  • Cradley
  • Little Malvern

See all the areas we cover here!